EV3 AC 22 kW (IoT) สาย 5 เมตร (รวมค่าติดตั้ง)

Features

• Supports work both in residences and public use
• Install an identity verification system To show charging rights via RFID
• Material is Aluminum, lightweight and rust-free. Suitable for use inside and outside buildings.
• There are LEDs showing the working status of the charger (POWER, CONNECT, CHARGE, ERROR).
• Set charging time in advance and adjust the charging current via Web application
• Install communication equipment between the user and the machine. It communicates via Wifi and Modbus TCP so that charging data can be used to create a cost management system. Can be combined with building management
• In the case of using a single device The charger can be contacted via the built-in Wifi. The user can read the operating values of the machine. Users’ electricity usage information via the installed Web application.
• EV Charger’s Web Application is designed to be easy to use. to use in settings Set usage rights and report charging results It shows the charging power, current used, charging status and error report. If there is a problem while charging This includes the charger, power, total charger time and charging interval. to calculate the cost per time or per month
• Report user’s charging history Time to start charging Charging time Energy used

Advantage

• Select Mode, maximum charging current 16 A or 32 A
• The charging current can be adjusted from 6-16 A or 6-32 A via Mobile to suit use.
• Can set charging rights via RFID
• The EV set separates the control system from the electrical power. This increases the lifespan of the EV Charger.
• There is a direct current leakage protection device of 6 mA installed to ensure the safety of life and property.
• There is a device to prevent electrical leakage on the alternating current side of 30 mA Type A (external equipment)
• There is a device to protect against surges from lightning. Helps protect the car and charger. If lightning strikes while charging (external accessories)
• Material is strong Aluminum, reduces internal heat. No heat buildup
• Passed the test to meet IEC61851-1, IEC61851-21-2 standards. (Can protect against water and dust up to IP65 level)
• Received electricity saving label number 5
• Product guaranteed for 2 years
• You can choose the color of the charger

System

• Power System: 3 Phase 32A 50 Hz
• Output power : 22 kW
• Connector type/ Cable length : Type 2 / 5m.

Protection

• Residual current 6 mA DC (RCM) : Yes
• Local status display : System On/ Connect/ Charge/ Error
• Backout Protection : Via Modbus RTU
• Web Monitoring : Yes
• Remote On/Off : Yes
• 24 Hr Schedule charging program : Yes
• Energy monitoring : Yes
• Charging History (data logger) : Yes
• Charging current adjustable : Yes
• Authentication : Yes via RFID
• External Communication: Wifi, LAN, Modbus RTU
• Enclosure : Aluminum
• IP Protection Degree : IP65
• Dimention : WxHxD 165x400x120 mm